|
|
New Features in Service Pack 8
The eighth service pack of
NeuroCheck 5.1 provides a number of minor improvements and
fixes, listed in file History.txt, as usual.
-
NeuroCheck 5.1 introduced
the export of a check routine in XML format. In
addition, service pack 8 now provides an export
of NeuroCheck's global configuration settings in XML
format.
As for the check routine, the major benefit is an easy
print-out and documentation of all global settings, e.g.
the signals used for remote control or the designation
of the I/O bits in the device manager. This can be
useful to copy an application or to re-build a system in
case of a hard disk crash. You also can track changes to
the settings by comparing the XML files.
In contrast to the check routine, the configuration is
exported automatically each time when settings have
changed. So, in parallel to the still used binary
NeuroCheck configuration file NcCfg.cfg, the NeuroCheck
folder now will contain a new file called NcCfg.cfgx
which holds the XML data. Open the cfgx file with the MS
Internet Explorer to obtain a printable XSL
visualization of the settings (see image).
If you download this service pack
from the Internet please first execute the included file
cfgx.reg. Thus the cfgx file extension will be assigned
to the Internet Explorer.
-
The NeuroCheck driver for
the Baumer NeuroCheck Edition IEEE 1394 (FireWire)
cameras supports new camera models (see also Supported
Cameras):
FWX03/FWX03c with 656 x 494 pixel resolution at 70
frames per second.
FWX20/FWX20c with 1624 x 1236 pixel resolution at 12
frames per second.
Please note that due to the
changes a new Baumer optronic FWX system DLL Fxlib.dll
version 5.0.1.25 or higher is required. We recommend to
use a system driver Baumer1394.sys version 1.50.0.148 or
higher.
In order to avoid compatibility problems in existing
applications, the service pack for download from the
Internet does not contain the new driver DLL. You can
order both NeuroCheck driver DLL and low-level drivers
from
support@fsinet.com.
-
The NeuroCheck driver for
the Basler BCam IEEE 1394 (FireWire) cameras also has
been adapted to support new camera models (see Supported
Cameras).
Please note that a Basler BCam low
level driver version 1.8 is required.
In order to avoid compatibility problems in existing
applications, the service pack for download from the
Internet does not contain the new driver DLL. You can
order both NeuroCheck driver DLL and low-level drivers
from
support@fsinet.com.
-
The driver for the
mvTITAN frame grabber series now also
supports the mvGAMMA-CL CameraLink frame grabber board
for cost-effective operation of one BASE CameraLink
camera.
Please note that a new Matrix-Vision mvTITAN low-level
driver version 1.5.27.23 or higher is required.
In order to avoid compatibility problems in existing
applications, the service pack for download from the
Internet does not contain the new driver DLL. You can
order both NeuroCheck driver DLL and low-level drivers
from
support@fsinet.com.
|
|
|
|
